Hendlex Matte Ceramic Coating Kit for Matte and PPF Surfaces, 50ml

This ceramic coating not only maintains the natural matte/satin finish but also enhances color and depth without adding gloss or altering the original matte appearance. It stands out for its exceptional durability, offering protection for up to 2 years.

The coating creates a supremely slick surface with superior hydrophobic properties, actively repelling water for self-cleaning and effortless maintenance. It provides comprehensive protection against intense UV radiation, heat, and chemicals, safeguarding against stains, dirt, contaminants, and light wash marks.

The coating is suitable for all matte and satin-finished surfaces, including paintwork, PPF (paint protection film), vinyl wrap, and carbon fiber. Its easy one-layer application is designed for simple and convenient use.

With this ceramic coating, your matte finish will remain unique, sleek, and absolutely stunning.

Package contents

• Hendlex Nano Ceramic Coating Matte (50 ml)
• Application sponge (1 pc.)
• Gloves (1 pc.)

Properties

• Enhances color and depth without adding gloss or altering the original matte appearance.
• Protection for up to 2 years.
• Creates an extremely slick surface that actively repels water for self-cleaning and effortless maintenance.
• Provides strong resistance to UV radiation, heat, and chemicals, protecting against stains, dirt, contaminants, and light wash marks.
• Suitable for all matte and satin-finished surfaces such as paintwork, PPF, vinyl wrap, and carbon fiber.
• Easy one-layer application.
• Non-yellowing.

Technical Specifications

• Application surfaces: Suitable for all matte and satin-finished surfaces, including paintwork, PPF (paint protection film), vinyl wrap, and carbon fiber.
• Coverage area: 50 ml for up to 2 cars, depending on the surface.
• Durability: Up to 2 years, depending on weather conditions.

Surface Preparation

Properly prepare the surface before applying NANO CERAMIC COATING MATTE. Follow the guidelines below to ensure the effectiveness of the product:

• The surface must be thoroughly washed and free of grease, contaminants, and residues.
• Any previous coatings or waxes should be removed. The use of Hendlex Wax Remover is recommended.
• Polishing the car to remove scratches, swirls, or holograms is highly recommended.
• Ensure the surface is completely dry.

Note: It is recommended to use Hendlex Paint Prepare before applying the coating for best results.

Instructions for Use

• Ensure the surface is clean, dry, and free of grease or wax.
• Fully wet the application pad.
• During the coating process, keep the application pad wet by adding an additional 5–6 drops.
• Apply a thick wet layer evenly on a small section.
• Make sure there are no uncovered spots left.
• Allow the coating to cure for about 5 minutes and then polish with a microfiber cloth until a smooth finish is achieved.

CAUTION: Do not apply the coating under direct sunlight. Proper application temperature range: +10 °C to +25 °C. Do not apply the coating if the temperature exceeds +30 °C. After finishing the coating application, polish it using a microfiber cloth. Ensure that no spots remain unpolished.

Hazard statements: Flammable liquid and vapour. May be fatal if swallowed and enters airways. Causes severe skin burns and eye damage. May cause drowsiness or dizziness. Harmful to aquatic life with long lasting effects. Keep out of reach of children. Poison Control Center (Greece): +30 210 7793777. Safety data sheets are available upon request.