Hendlex Ceramic Coating M3 Advanced Nano Ceramic for Car Body

Hendlex Body Shield M3 is one of the most popular nano-ceramic protective coatings for car bodies. The M3 ceramic coating is easy to apply and designed exclusively for professional use.

The protective ceramic coating is durable and sturdy and can be applied on painted and varnished surfaces, plastics, or metals. The M3 nano-coating provides high hardness and long-lasting protection for the car body. It preserves the car paint, giving it gloss and protecting it from environmental impacts such as acids, alkalis, road salts, and UV rays. 

Package Contents:

• Hendlex M3 Ceramic Coating (40ml)
• Microfiber cloth (1 pc)
• Applicator
• Disposable gloves (1 pair)
• Application instructions

Technical Specifications

• Application fields: Painted and varnished surfaces, plastics, and metals
• Coverage: 40ml is sufficient for a medium-sized car with two-layer application
• Durability: up to 5 years, depending on weather conditions
• Shelf life: 1 year unopened 

Surface Preparation

Adequately prepare the surface before applying Hendlex M3. Guidelines to ensure product effectiveness:

• The surface must be thoroughly washed, free of grease, contaminants, and residue.
• Prior coatings or waxes must be removed. Hendlex Wax Remover is recommended.
• Polishing the car is highly recommended to remove scratches, swirls, or holograms.
• Ensure the surface is completely dry.

Note: It is recommended to use Hendlex Paint Prepare before applying the coating for best results. 

Application Instructions

• Hold the applicator by the base. Place the application cloth on the soft part of the applicator and fix it into the cutouts on both sides. For smaller areas, it is recommended to use only the application cloth without the applicator.
• Open the bottle and wet the application cloth thoroughly. During the coating process, keep the cloth wet by adding an additional 5–6 drops.
• Apply the coating evenly in a criss-cross motion. Do not use circular movements.
• Coat one panel at a time. Try to coat from edge to edge to avoid layering marks. Ensure there are no uncovered spots left.

After applying the coating, wait:

– if the temperature is below +24 °C → 3 minutes

– if the temperature is above +24 °C → 1 minute

– do not apply if the temperature exceeds +30 °C

• Polish the surface with a high-quality microfiber cloth. Make sure no unpolished areas remain.

Recommended coating curing period:

- if the temperature is above +22 °C → 12 hours initial curing

- if the temperature is +20 °C → 24 hours initial curing

 Attention! Do not wash the car for at least 7 days. Depending on the ambient temperature, the coating fully hardens in 7 days.