SPRAYABLE CERAMIC DC60 COATING 

Sprayable Ceramic DC60 coating is an premier sprayable ceramic coating for car body that provides chemical – resistance and prevents grease from getting stuck to the vehicle body. Due to strong resistance, the car looks like brand new.

The significant feature of the nano-coatings is that you do not need to wash your vehicle often because the dust and grease do not stick to its surface. When it rains, the car is washes itself  because the raindrops do not adhere to the thick grease as they collect the mud from the vehicle and roll to the ground along with it.

The sprayable coating is easy to apply. So, it can effectively be used both by professionals and car owners. The layer revitalises the colour of the car hood and brings the shine.

*PACKED UNDER INERT GAS. Guaranteed 100% effectiveness. 

PREPARATION OF SURFACE

Adequately prepare the surface before the application of Hendlex DC60. Guidelines to follow to ensure the effectiveness of the product:

• The surface must be washed thoroughly, free of any grease, contaminants, and residue.
• If the car is waxed, wax should be removed before applying the coating. Hendlex Wax Remover is recommended. For best results, it is highly recommended to polish the car to remove any scratches, swirls, or holograms. Ensure the surface is completely dry. It is recommended to utilize Hendlex Paint Prepare before applying the coating. 

USAGE

1. Facing away from the car, spray the coating on the microfiber cloth.

2. Spread the coating evenly until the surface is entirely covered by a wet uniform layer. It is recommended to work in small sections.

3. Allow the coating to cure for 1 minute or until the even layer of coating starts turning into scattered droplets.

4. Polish the surface with a microfiber cloth until all excess coating is wiped off.

5. Wipe the coated area with a clean part of the microfiber cloth for the perfect finish.

6. Recommended coating curing period:

– if the temperature is above +20 °C – 12 hours initial;

– if the temperature is below +20 °C – 24 hours initial.

*Do not wash the car for at least 7 days.

Note: After coating the car, turn the bottle upside down and clean the included sprayer by spraying the remaining coating out. Store with the original bottle cap 

CAUTION!

• Do not apply the coating on matte surfaces or direct sunlight.
• Proper application temperature range: +10 °C to +25 °C.
• Do not coat if temperature is more than +30 °C.
• Upon finishing applying the coating, polish it by using microfiber cloth.
• Ensure there are no spots left unpolished.